Guide · Formats

MP3 vs M4A vs FLAC: which one should you keep?

A practical comparison based on compatibility, size and what happens when you convert. Including the conversions that are not worth doing.

MP3, M4A and FLAC are not three levels of the same thing. One is a decades-old delivery format, one is a more efficient modern codec in an Apple container, and one is a lossless archive. Choosing well is mostly about what you want to do next.

The short answer

FormatTypeBest forWeakness
MP3LossyUniversal playback, sharing, old devicesLess efficient than newer codecs
M4A (AAC)LossyApple devices, efficient music storagePatchier support on old hardware
FLACLosslessArchiving, hi-fi, mastering sourcesLarger files; some players ignore it
WAVUncompressedEditing, recording, interchangeVery large; no metadata standards
OpusLossySpeech, streaming, low bitratesLimited hardware support

MP3: the universal format

MP3 has been around since the early 1990s and won the format war for one reason: everything plays it. Car stereos, portable players, DJ software, podcast apps, cheap radios and embedded systems all understand it. At 192–320 kbps it sounds good enough for most listening.

Its age shows in efficiency. AAC and Opus reach similar perceived quality at lower bitrates, and MP3 has no native support for modern features such as gapless playback or advanced metadata. But compatibility is a feature, and MP3 still wins it.

M4A: better engineering, narrower reach

M4A is an MP4 container with audio only, almost always AAC. It is what Apple devices produce and what many streaming services deliver. At 128 kbps AAC, most listeners cannot distinguish it from a much higher-bitrate MP3.

The catch is hardware. A modern phone handles M4A without thinking; a 2010 car stereo may not. If your destination is a phone, an Apple device or a modern computer, M4A is a sensible choice. If it is a USB stick for an old car, MP3 is safer.

FLAC: keep everything

FLAC compresses PCM without discarding anything, typically to 50–70% of the original WAV size. It is the standard lossless format for archiving, live recordings and hi-fi libraries. Tags and artwork are supported properly.

FLAC is not a delivery format for the average listener. It is larger than MP3, and plenty of hardware ignores it. The right pattern is to keep FLAC as the master and create MP3 copies for devices that need them.

What “quality” means across formats

Lossless formats are transparent by definition: the decoded audio is identical to the source. Lossy formats approximate it. The approximations are designed around psychoacoustics — they discard detail the encoder predicts you will not notice.

Two consequences follow. First, a higher bitrate does not always mean audibly better; it means less discarded. Second, transcoding a lossy file to another lossy format cannot restore anything. It adds a second approximation on top of the first.

Rough perceptual guide, not a measurement
MP3 128 kbpsCasual; artefacts on dense music
MP3 192 kbpsTransparent for most listeners
MP3 256–320 kbpsSafety margin; diminishing returns
AAC 128 kbpsRoughly comparable to 160–192 kbps MP3
FLAC / WAVIdentical to the source

Size, in practical terms

FormatOne hour of stereo audioRelative size
WAV 44.1/16≈ 635 MB100%
FLAC≈ 350–450 MB55–70%
MP3 320 kbps≈ 144 MB≈ 23%
MP3 192 kbps≈ 86 MB≈ 14%
AAC 128 kbps≈ 58 MB≈ 9%

When to convert, and when not to

  • FLAC → MP3: yes, for a portable copy. Keep the FLAC.
  • WAV → MP3: yes, for delivery. Keep the WAV if you might edit.
  • M4A → MP3: yes, if a device needs MP3. Accept one generation of loss.
  • MP3 → M4A: almost never worth it. You gain little and lose a generation.
  • MP3 128 → MP3 320: no. The detail is already gone; the file only gets bigger.
  • Anything → FLAC: no. Converting a lossy file to FLAC makes a large file with the same lossy content.

A decision you can make in ten seconds

Format by intent
I need it to play anywhereMP3, 192–256 kbps
I live in Apple’s ecosystemM4A/AAC, 128–256 kbps
I am archiving a recordingFLAC (or WAV for editing)
I am editing repeatedlyWAV or FLAC master, MP3 for delivery
I am publishing a podcastMP3 96–128 kbps mono, or M4A if your host supports it

FAQ

Format questions

Is M4A better than MP3?

Technically, AAC (the codec inside M4A) is more efficient than MP3: it reaches similar perceived quality at a lower bitrate. In practice, compatibility decides. MP3 plays on more devices, especially old car stereos and cheap players. M4A is the better choice inside the Apple ecosystem.

Is FLAC better than MP3?

FLAC is lossless, so it preserves everything. MP3 is lossy, so it discards detail. FLAC is the better archive; MP3 is the more portable delivery format. Keep both if the recording matters.

Should I convert FLAC to MP3?

Convert a copy for playback on devices that do not support FLAC. Keep the FLAC as the master. Never delete the lossless file after making an MP3.

What about WAV?

WAV is uncompressed PCM. It is the best editing source and the worst delivery format because of its size. Convert to MP3 or FLAC for storage and sharing.

Does converting between lossy formats always lose quality?

Yes. Each lossy encode is another generation of approximation. Convert from the best source you have and keep that output. Avoid MP3 → M4A → MP3 chains.

Keep the master. Make the copy.

Convert locally and leave the original exactly as it was.